Yaskawa MP2000 Series I/O Module User Manual - Manual (Page 124)

5.1 Outline of DO-01 Module
5.1.4 LED Indicators
124
( 2 ) Environmental Conditions
5.1.4 LED Indicators
The following table shows the DO-01 Module status when each indicator lamp is lit or unlit.
Item Specifications
Environmental
Conditions
Ambient Operating
Temperature
0 to 55°C
Ambient Storage
Temperature
-25 to 85°C
Ambient Operating
Humidity
30% to 95% (with no condensation)
Ambient Storage
Humidity
5% to 95% (with no condensation)
Pollution Level Pollution level 1 (conforming to JIS B 3501)
Corrosive Gas There must be no combustible or corrosive gas.
Operating Altitude 2,000 m above sea level or lower
Mechanical
Operating
Conditions
Vibration Resistance
Conforming to JIS B 3502:
• 10 to 57 Hz with single-amplitude of 0.075 mm
• 57 to 150 Hz with fixed acceleration of 9.8 m/s
2
• 10 sweeps each in X, Y, and Z directions
(sweep time: 1 octave/min)
Shock Resistance
Conforming to JIS B 3502:
Peak acceleration of 147 m/s
2 twice for 11 ms each in the X, Y, and Z direc-
tions
Electrical
Operating
Conditions
Noise Resistance
Conforming to EN 61000-6-2, EN 55011 (Group 1, Class A)
Power supply noise (FT noise): 2 kV min., for one minute
Radiation noise (FT noise): 1 kV min., for one minute
Ground noise (impulse noise): 1 kV min., for 10 minutes
Electrostatic noise (contact discharge): 4 kV min., for 10 times
Installation
Requirements Ground Ground to 100 Ω max.
Cooling Method Natural cooling
Indicator Color When Lit When Unlit
RUN Green Normal operation Error occurrence
FUSE Red
One or some of the output protection
fuses is blown out.
Output protection fuses are normal.
FUSE RUN