Yaskawa MP2000 Series I/O Module User Manual - Manual (Page 26)

1.4 Module Configuration Definition
1.4.1 Displaying the Module Configuration Window
26
1.4 Module Configuration Definition
Execution of the self-configuration generates the files for the Module configuration definitions of the default settings.
To change the Module configuration definition, call up the Module Configuration Window as described below to
change the definition data.
1.4.1 Displaying the Module Configuration Window
Use the following procedure to display the Module Configuration Window.
„ MPE720 Ver. 6
1.
Start the MPE720 on the personal computer connected to the Machine Controller and open the project
file.
ΠFor information on starting the MPE720, refer to Engineering Tool for MP2000 Series Machine Controller
MPE720 Version 6 User's Manual (Manual No.: SIEPC88070030).
2.
Select Setup - Module configuration in the Launcher, or double-click Module configuration of sys-
tem sub-program.
The Module Configuration Window will be displayed (see next page).
„
MPE720 Ver. 5
1.
Start the MPE720 on the personal computer connected to the Machine Controller and use the File
Manager to log in and go online with the application for the Machine Controller.
ΠFor information on starting the MPE720 and logging on, refer to Machine Controller MP900/MP2000 Series
MPE720 Software for Programming Device User's Manual (Manual No.: SIEPC88070005).
2. Double-click the Module Configuration Icon in the Definition Folder.
The Module Configuration Window will be displayed (see next page).