6 lio-05 module connections, 1 ) cn1 connector, Lio-04/lio-05 module – Yaskawa MP2000 Series I/O Module User Manual User Manual
Page 79
3.2 Specifications of LIO-04/LIO-05 Module Connections
3.2.6 LIO-05 Module Connections
79
3
LIO-04/LIO-05 Module
3.2.6 LIO-05 Module Connections
The following diagrams show connection examples for CN1/CN2 connector of the LIO-05 Module.
( 1 ) CN1 Connector
Check the polarity of the external power supply when wiring. An adverse connection may cause a load malfunction.
The pins No. 15 and 40 and the pins No. 22 and 47 are internally connected. Connect them externally as well.
+ -
- +
1
2
27
5
30
6
7
32
10
35
JAPMC-IO2304
+ -
- +
+5V
5.6k
ǡ
R
R
L
L
L
L
L
L
15
12
37
13
38
40
+ -
41
17
42
16
39
L
R
R
L
L
L
L
L
L
L
22
19
44
20
45
47
+ -
48
24
49
23
46
L
R
R
L
24 VDC
Com-
mon 1
Com-
mon 2
Input 0
Input 1
Input 6
Input 7
Input 8
Input 9
Input 14
Input 15
24 VDC
CN1 connector
pin No.
Photocoupler
Photocoupler
Photocoupler
Internal
circuit
Fuse blown
detection circuit
Fuse blown
detection circuit
Output 0
Output 1
Output 2
24 VDC
Output 4
Output 5
Output 6
Output 7
Output 3
24 VDC
Output 8
Output 9
Output 10
Output 12
Output 13
Output 14
Output 15
Output 11
A fuse is inserted in the output common line of the LIO-05 Module for circuit protection. However, the fuse
may not be blown out in the cases such as layer shorts in outputs. To ensecure the circuit protection, provide
a protective element such as fuse in each output as shown in the above diagram.