Yaskawa MP2000 Series I/O Module User Manual - Manual (Page 28)

1.4 Module Configuration Definition
1.4.3 Changing the Module Configuration Definition
28
1.4.3 Changing the Module Configuration Definition
( 1 ) Module Details
Function details can be set in the Module Details Area.
• Refer to 2.3 LIO-01/LIO-02 Module Details on page 43 for information on setting LIO-01/LIO-02 Module
details.
• Refer to 3.3 LIO-04/ LIO-05 Module Details on page 82 for information on setting LIO-04/LIO-05 Module
details.
• Refer to 4.3 LIO-06 Module Details on page 99 for information on setting LIO-06 Module details.
• Refer to 5.3 DO-01 Module Details on page 134 for information on setting DO-01 Module details.
( 2 ) Manual Allocation of I/O Registers
I/O registers can be changed in the Module Details Area.
Double-click the I/O leading register, input the desired value, and confirm the change.
The I/O end register will be changed automatically when the I/O leading register is changed.
After changing the register number, save the definition data by selecting File – Save & Save into flash memory from
the main menu.
ΠWhen changing a register number, make sure that the new register number is not already allocated. If a register
number that is already allocated is used, the text will turn red. If this occurs, change the register number.