ProSoft Technology PTQ-101M - Manual (Page 12)

PTQ-101M ♦ Quantum Platform Start Here
IEC 60870-5-101 Master Communication Module
Page 12 of 181 ProSoft Technology, Inc.
May 14, 2008
1454-9F DB-9 Female to 9 Pos Screw Terminal
adapter (Serial protocol modules only)
ProSoft Solutions CD
Note: The DB-9 Female to 5 Pos Screw Terminal adapter is not required on Ethernet modules and
is therefore not included in the carton with these types of modules.
1.1.2 Quantum / Unity Hardware
This guide assumes that you are familiar with the installation and setup of the
Quantum / Unity hardware. The following should be installed, configured and
powered up before proceeding:
Quantum or Unity Processor
Quantum
rack
Quantum power supply
Quantum Modbus Plus Network Option Module (NOM Module) (optional)
Quantum to PC programming hardware
NOM Ethernet or Serial connection to PC
1.1.3 PC and PC Software
Windows-based PC with at least one COM port
Quantum programming software installed on machine
or
Concept™ PLC Programming Software version 2.6
or
ProWORX PLC Programming Software
or
UnityPro XL PLC Programming Software
HyperTerminal (used in this guide) This is a communication program that is
included with Microsoft Windows. You can normally find it in Start /
Programs / accessories / Communications
.
Note: ProTalk modules are compatible with common Quantum / Unity programming applications,
including Concept and UnityPro XL. For all other programming applications, please contact
technical support.