ProSoft Technology PTQ-101M - Manual (Page 31)

Configuring the Processor with Concept PTQ-101M ♦ Quantum Platform
IEC 60870-5-101 Master Communication Module
ProSoft Technology, Inc. Page 31 of 181
May 14, 2008
Now you should see the EVENTFB function block at the FBD section:
This step will create variables to be associated to the function block PINs. We will
start with the Instat PIN. The variable for this PIN must point to the same start
address where block 9903 will be copied to. For this example we are considering
the following configuration for block 9903:
3x Register Start : 1 #3x start register where data moved from module
to processor (1 to n)
This implies that the variable associated to PIN Instat must also start at the
same register address (300001 for this example).
As the Instat PIN will start same as 3x
The variable that associated with PIN OutCntrl must start at the same register
address 400001
4x Register Start : 1 #4x start register where data moved from
processor
to module (1 to n)
This example will use the same name as the PIN.