ProSoft Technology PTQ-101M - Manual (Page 28)

PTQ-101M ♦ Quantum Platform Configuring the Processor with Concept
IEC 60870-5-101 Master Communication Module
Page 28 of 181 ProSoft Technology, Inc.
May 14, 2008
2 Create a new project and save it at the C:\PROJECT folder. For this example
we will consider the project name as PTQPROJ.
3
At PLC Memory Partition make sure that the processor memory range is
configured large enough for the PTQ-101M backplane usage.
4 On the File menu, choose Close Project. Open the File menu again and then
choose Open to open the PTQPROJ file again. This step allows the Concept
application to recognize the new data types defined at the PTQ-101M.DTY
file.