Add the ptq module to the project – ProSoft Technology PTQ-101M User Manual
Page 18
Advertising
PTQ-101M ♦ Quantum Platform
Configuring the Processor with Concept
IEC 60870-5-101 Master Communication Module
Page 18 of 181
ProSoft Technology, Inc.
May 14, 2008
2.3
Add the PTQ Module to the Project
The next step is to add one or more of the PTQ modules to the Project. To add
modules:
1
In the list of options on the left side of the PLC Configuration dialog box,
double-click I/O Map. This action opens the I/O Map dialog box.
2
Click the Edit button to open the Local Quantum Drop dialog box. This dialog
box is where you identify rack and slot locations.
Advertising