ProSoft Technology PTQ-101M - Manual (Page 166)

PTQ-101M ♦ Quantum Platform Reference
IEC 60870-5-101 Master Communication Module
Page 166 of 181 ProSoft Technology, Inc.
May 14, 2008
⌧ <34> := Measured value, normalized value with time tag CP56Time2A
M_ME_TD_1
⌧ <35> := Measured value, scaled value with time tag CP56Time2A
M_ME_TE_1
⌧ <36> := Measured value, short floating point value with time tag
CP56Time2A M_ME_TF_1
⌧ <37> := Integrated totals with time tag CP56Time2A M_IT_TB_1
<38> := Event of protection equipment with time tag CP56Time2A
M_EP_TD_1
<39> := Packed start events of protection equipment with time tag
CP56time2A M_EP_TE_1
<40> := Packed output circuit information of protection equipment with
time tag CPT56Time2a M_EP_TF_1
Process information in control direction
(station-specific parameter)
⌧ <45> := Single command C_SC_NA_1
⌧ <46> := Double command C_DC_NA_1
⌧ <47> := Regulating step command C_RC_NA_1
⌧ <48> := Set point command, normalized value C_SE_NA_1
⌧ <49> := Set point command, scaled value C_SE_NB_1
⌧ <50> := Set point command, short floating point value C_SE_NC_1
⌧ <51> := Bitstring of 32 bit C_BO_NA_1
System information in monitor direction
(station-specific parameter)
⌧ <70> := End of initialization M_EI_NA_1
System information in control direction
(station-specific parameter)
⌧ <100> := Interrogation command C_IC_NA_1
⌧ <101> := Counter interrogation command C_CI_NA_1
⌧ <102> := Read command C_RD_NA_1
⌧ <103> := Clock synchronization command C_CS_NA_1
⌧ <104> := Test command C_TS_NB_1
⌧ <105> := Reset process command C_RP_NC_1
⌧ <106> := Delay acquisition command C_CD_NA_1
Parameter in control direction
(station-specific parameter)