Create a new project – ProSoft Technology PTQ-101M User Manual
Page 15
Configuring the Processor with Concept
PTQ-101M ♦ Quantum Platform
IEC 60870-5-101 Master Communication Module
ProSoft Technology, Inc.
Page 15 of 181
May 14, 2008
5
Click the add all button. A series of message boxes may appear during this
process. Click Yes or OK for each message that appears.
6
When the process is complete, open the File menu and choose Exit to save
your changes.
2.2
Create a New Project
This phase of the setup procedure must be performed on a computer that has
the Concept configuration software installed.
1
From your computer, choose Start / Programs / Concept V2.6 XL.EN /
Concept
. This action opens the Concept window.
2
Open the File menu, and then choose New Project. This action opens the
PLC Configuration dialog box.