ProSoft Technology PTQ-101M - Manual (Page 163)

Reference PTQ-101M ♦ Quantum Platform
IEC 60870-5-101 Master Communication Module
ProSoft Technology, Inc. Page 163 of 181
May 14, 2008
7.9 Interoperability
This companion standard presents sets of parameters and alternatives from
which subsets have to be selected to implement particular telecontrol systems.
Certain parameter values, such as the number of octets in the COMMON
ADDRESS of ASDUs represent mutually exclusive alternatives. This means that
only one value of the defined parameters is admitted per system. Other
parameters, such as the listed set of different process information in command
and in monitor direction allow the specification of the complete set or subsets, as
appropriate for given applications. This clause summarizes the parameters of the
previous clauses to facilitate a suitable selection for a specific application. If a
system is composed of equipment stemming from different manufacturers it is
necessary that all partners agree on the selected parameters.
The selected parameters should be crossed in the white boxes (replace " " with
"⌧").
NOTE In addition, the full specification of a system may require individual selection of certain
parameters for certain parts of the system, such as the individual selection of scaling factors for
individually addressable measured values.
Network configuration
(network-specific parameter)
⌧ Point-to-point ⌧ Multipoint-party line
⌧ Multiple point-to-point ⌧ Multipoint-star
Physical Layer
(network-specific parameter)
Transmission speed (control direction )
Unbalanced interchange Unbalanced interchange Balanced interchange
circuit V.24/V.28 circuit V.24/V.28 circuit X.24/X.27
Standard Recommended if >1 200 bit/s
100 bit/s ⌧ 2400 bit/s ⌧ 2400 bit/s
56000 bit/s
200 bit/s ⌧ 4800 bit/s ⌧ 4800 bit/s
64000 bit/s
⌧ 300 bit/s ⌧ 9600 bit/s ⌧ 9600 bit/s
⌧ 600 bit/s ⌧ 19200 bit/s
⌧ 1200 bit/s ⌧ 38400 bit/s
Transmission speed (monitor direction)
Unbalanced interchange Unbalanced interchange Balanced interchange
circuit V.24/V.28 circuit V.24/V.28 circuit X.24/X.27