ProSoft Technology PTQ-101M - Manual (Page 20)

PTQ-101M ♦ Quantum Platform Configuring the Processor with Concept
IEC 60870-5-101 Master Communication Module
Page 20 of 181 ProSoft Technology, Inc.
May 14, 2008
5 Repeat steps 3 through 5 for each ProTalk module you plan to install. When
you have finished installing your ProTalk modules, click OK to save your
settings. Click Yes to confirm your settings.
Tip: Select a module, and then click the Help on Module button for help pages.
2.4 Set up Data Memory in Project
1
In the list of options on the left side of the PLC Configuration dialog box,
double-click Specials.