ProSoft Technology PTQ-101M - Manual (Page 125)

Reference PTQ-101M ♦ Quantum Platform
IEC 60870-5-101 Master Communication Module
ProSoft Technology, Inc. Page 125 of 181
May 14, 2008
Event Pass-Through Block (9903)
Event Pass-Through Functionality
The event pass-through functionality allows the module to pass events to the
processor after these are received from the IEC-8707-5-101 slave devices. We
are considering events as the messages associated to supported ASDU types
that contain timestamp (Hour:Minute:Seconds:Milliseconds).
Note: The event pass-through functionality is only available for version 1.12 or later.
To verify the firmware revision of your module, press the [V] key from the main
menu and look for the SOFTWARE REVISION LEVEL value. If your module
does not have version 1.12 installed, please contact the ProSoft Technology tech
support team for information on how to upgrade your module.
The event pass-through functionality must be initially enabled by the user through
the following configuration parameter: