ProSoft Technology PTQ-101M - Manual (Page 32)

PTQ-101M ♦ Quantum Platform Configuring the Processor with Concept
IEC 60870-5-101 Master Communication Module
Page 32 of 181 ProSoft Technology, Inc.
May 14, 2008
1 Click the Variable declaration button to open the Variable Editor dialog box.
2 Click OK and you should see the new variable associated to the Instat PIN:
3 Repeat for OutCntrl Pin to use for Output.
4 Repeat the last item for the other PINS (it is not necessary to associate any
memory address to the other variables).