ProSoft Technology PTQ-101M - Manual (Page 153)

Reference PTQ-101M ♦ Quantum Platform
IEC 60870-5-101 Master Communication Module
ProSoft Technology, Inc. Page 153 of 181
May 14, 2008
Offset Parameter Description
14 Event Msg
Overflow This word contains a value of 0 if the event message buffer has not
overflowed. If the event buffer overflows, this word will be set to a
value of 1.
15 Session Count This word contains the number of session configured in the module.
16 Current Cmd This word contains the index of the current command being executed
in the command list.
17 Cmd Busy Flag This word is set to zero if no command is currently being executed
and waiting on a response. If the word is set to 1, a command is
currently executing.
18 Cmd Count This word contains the count of the number of commands configured
for the module.
19 Cmd Delay This word contains the command delay counter preset. There is a
fixed delay between each command to permit the module to perform
class polls on controlled stations.
20 Cmd Queue This word is set to zero if the command executing is from the
command list. If the executing command is from the command queue,
the word will be set to 1.
21 Cmd Queue
Count This word contains the number of active commands in the command
queue for the module. Up to 100 commands can be buffered in this
queue. These commands are transferred from the processor to the
module using special command blocks.
22 to 23 Online Status This double word value contains a bit for each of the 32 potential
sessions in the module. If the bit is set for a session in the double
word, the station is online. If the bit is clear, the station is offline. Use
this value to determine if commands sent from the processor will have
a chance of succeeding.
24 CH 0 State This word contains the state machine value for channel 0.
25 Cmd Req This word contains the number of commands transferred out channel
0.
26 Cmd Resp This word contains the number of command response messages
received on channel 0.
27 Cmd Err This word contains the number of command errors recognized on
channel 0.
28 Requests This word contains the total number of messages transmitted on
channel 0.
29 Responses This word contains the total number of messages received on channel
0.
30 Err Sent This word contains the number of error messages sent on channel 0.
31 Err Received This word contains the number of error messages received on
channel 0.
32 Cfg Err This bit mapped word recognizes any configuration errors for channel
0. Refer to the configuration error word table for a definition of each
bit.
33 Current Error This word contains the error code for the current command executing
on channel 0.
34 Last Error This word contains the error code for the last error recognized on
channel 0.
35 CH 1 State This word contains the state machine value for channel 1.
36 Cmd Req This word contains the number of commands transferred out channel
1.