ProSoft Technology PTQ-101M - Manual (Page 36)

PTQ-101M ♦ Quantum Platform Configuring the Processor with Concept
IEC 60870-5-101 Master Communication Module
Page 36 of 181 ProSoft Technology, Inc.
May 14, 2008
2.6 Download the Project to the Processor
The next step is to download (copy) the project file to the Quantum Processor.
1
Use the null modem cable to connect your PC's serial port to the Quantum
processor, as shown in the following illustration.
Note: You can use a Modbus Plus Network Option Module (NOM Module) module in place of the
serial port if necessary.
2 Open the PLC menu, and then choose Connect.