Setup the concept project – ProSoft Technology PTQ-101M User Manual
Page 27
Advertising
![background image](/files/866179/content/doc027.png)
Configuring the Processor with Concept
PTQ-101M ♦ Quantum Platform
IEC 60870-5-101 Master Communication Module
ProSoft Technology, Inc.
Page 27 of 181
May 14, 2008
5
Close the Concept Converter tool. Now you can refer to C:\PROJECT\DFB to
check that the function block (.DFB) was exported and is ready to be used.
Setup the Concept Project
1
Start the Concept software as shown in the following illustration...
Advertising