Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher - Manual (Page 104)

104
Input/output signal settings
Displaying the HDMI input signal information
These are used to display the information concerning the HDMI input signal images.
The information cannot be changed.
1 On the Input sub menu, use [F2] to select the input to be set using the Select item.
 Refer to “Input signal settings”.
2 Use [F1] to display the HDMI Status sub menu.
Size This indicates the pixel count of the images.
Dot Clock This indicates the dot clock frequency of the images.
H-Frequency This indicates the horizontal frequency of the images.
V-Frequency This indicates the vertical frequency of the images.
The formats supported are listed below.
<HDMI formats supported>
HDMI input signal
Dot clock
frequency
(MHz)
Frequency
Horizontal
(kHz)
Vertical
(Hz)
XGA 1024×768 Digital 65.0 48.36 60.00
WXGA 1280×768 Digital 79.5 47.78 59.87
SXGA 1280×1024 Digital 108.0 63.98 60.02
WSXGA+ 1680×1050 Digital 146.2 65.29 59.95
UXGA 1600×1200 Digital 162.0 75.00 60.00
WUXGA 1920×1200 Digital 154.0 74.04 59.95
WQHD 2560×1440 Digital 241.5 88.79 59.95
720/59.94p 1920×1080 Digital 74.25/1.001 44.96 60.00/1.001
720/50p 1920×1080 Digital 74.25 37.50 50.00
1080/59.94i 1920×1080 Digital 74.25/1.001 33.72 60.00/1.001
1080/50i 1920×1080 Digital 74.25 28.13 50.00
1080/23.98p 1920×1080 Digital 74.2 27.0 24.00
1080/24p 1920×1080 Digital 74.2 27.0 24.00
1080/25p 1920×1080 Digital 74.2 28.1 25.00
1080/29.97p 1920×1080 Digital 74.2 33.7 30.00
1080/59.94p 1920×1080 Digital 148.5/1.001 67.50/1.001 60.00/1.001
1080/50p 1920×1080 Digital 148.5 56.25 50.00
2160/59.94p 3840×2160 Digital 594.0/1.001 134.9 60.00/1.001
2160/50p 3840×2160 Digital 594.0 112.5 50.00
p p If the format of the input signals is not supported, it may not be possible to import the signals properly, and a black image or
disturbed image may appear.