Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher - Manual (Page 30)

30
Preparations
Keyboard screen operations
When a name such as the name of the input signal material,
name of the memory or name of the data to be saved on an
memory card is to be changed, display the keyboard screen,
and input the characters.
When the rotary encoder [F2] to [F5] that corresponds to the
item (character input box) whose name is to be changed is
pressed, the keyboard screen appears on the built-in display.
Character input area
When the keyboard screen is displayed, use positioner
or rotary encoders [F1] to [F5] to input the characters
(alphanumerics and symbols).
The character selected is reflected in the character input area.
[F1]: CURSOR
Turn [F1] to move the cursor inside the character input
area.
[F2]: SHIFT
When [F2] is pressed, the keyboard display is switched
(between upper-case letters, lower-case letters and
symbols).
[F3]: CLEAR
When [F3] is pressed, all of the characters in the input
area are cleared.
[F4]: OK
When [F4] is pressed, the name which has been input is
entered, and reflected in the unit.
At this point, the keyboard screen is cleared, and the
original screen is restored.
[F5]: CANCEL
When [F5] is pressed, the name which has been input is
canceled.
At this point, the keyboard screen is cleared, and the
original screen is restored.
Menu delegation function
When the buttons listed below are double-clicked, the
specified menu is selected. (The menu delegation function)
The operation corresponding to the button pressed is also
executed.
Button Menu selected
Crosspoint area (AUX bus selector buttons)
KEY1 F/S Key menu/Adjust sub menu
When the chroma key is selected:
Chroma Key menu/Adjust sub menu
When PinP is selected:
PinP menu/Position sub menu
KEY2 F/S Key menu/Adjust sub menu
KEY3 F/S Key menu/Adjust sub menu
DSK1 F/S DSK menu/Adjust sub menu
When the chroma key is selected:
Chroma Key menu/Adjust sub menu
When PinP is selected:
PinP menu/Position sub menu
DSK2 F/S DSK menu/Adjust sub menu
Transition area
BKGD Time menu/BKGD sub menu
KEY Time menu/Key1 sub menu
WIPE Background menu/Border sub menu
<Menu delegation setting>
This setting is used to enable (turn on) or disable (turn off) the
menu delegation function.
1 Press the CONF
SYS
button to light its indicator, and display
the Config menu.
2 Use [F1] to display the Operate sub menu.
3 Use [F4] to set enable or disable for the menu
delegation function at the Delegation item.
On Enable
Off Disable