Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher - Manual (Page 140)

140
Remote camera link functions
Selecting a page of preset memories
1 Operate the CAM
PMEM
button to make it turn orange.
2 Page selection starts when the [PAGE] button is pressed.
p The [PAGE] button turns orange when a page is selected. Number keys 1 to 10 correspond to page numbers 1 to 10.
3 Use the number keys 1 to 10 or the [PAGE] button to complete selection of the page.
p If a number key 1 to 10 is pressed, the current page number changes to the value of the pressed number key.
p When the [PAGE] button is pressed, the current page number is not changed.
4 If there is at least one preset memory in the page, the LED of the number key that corresponds to the page lights.
p The number key that corresponds to the current page turns orange and all the other pages light green.
p In the example in the figure below, page numbers 1, 5, 6, 7, 8, and 10 each contain at least one preset memory, and page
number 1 is the current page.
STORE
DEL VMEM MACRO
EDIT
SHOT
MEM
BKGD
PATT
XPT
DSBL
TAKE
ENTER
7
NEW
8
COPY
9
PASTE
4
INS
5
DEL
6
MOD
1
<
2
>
3
REV
0/10
<<
.
>>
C
UNDO
CAM
PMEM
CAM
CONT
EVENT
MEM
KEY
PATT
-/+
PAGE
RE
CALL
MEMORY / WIPE PATTERN / 10 KEY
STILL 1 STILL 2 TRIM IN REC
CLIP 1 CLIP 2 TRIM OUT
< > REV
<< >> TRIM OFF PLAY
STOP
p The targets for project file storing and macro recording are as shown in the below table.
Storing project files Selections with the STORE/RECALL/DEL buttons,
Preset page numbers for input signals (for each connected camera)
Macro recording targets Storing preset memories,
Recalling preset memories,
Deleting preset memories,
Stopping with the [C](UNDO) button when recalling preset memories,
Selections with the [STORE]/[RECALL]/[DEL] buttons when recalling preset memories,
Page selections when recalling preset memories