Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher - Manual (Page 97)

97
Input/output signal settings
Checking the input signal status
You can check the status of input signals.
For SDI input signals
1 Use [F1] to display the Status sub menu.
The unit automatically determines the content of input
signals and displays the following information.
Format Displays the image format information for the
SDI signal being input.
Audio Displays the audio information for the SDI signal
being input.
Color Space Displays the color space information for the SDI
signal being input.
For HDMI input signals
1 Use [F1] to display the HDMI Status sub menu.
The unit automatically determines the content of input
signals and displays the following information.
Size Displays the resolution information for the HDMI
signal being input.
Dot Clock Displays the dot clock information for the HDMI
signal being input.
H-Frequency Displays the horizontal frequency information for
the HDMI signal being input.
V-Frequency Displays the vertical frequency information for
the HDMI signal being input.
Setting the frame synchronizer
The frame synchronizer can be set to On or Off for each input.
The HDMI input frame synchronizer is permanently On.
It cannot be set from On to Off or vice versa.
1 On the Input sub menu, use [F2] to select the input to
be set using the Select item.
 Refer to “Input signal settings”.
2 Use [F1] to display the FS sub menu.
3 Use [F3] to set the frame synchronizer in the FS item.
Off Turns the frame synchronizer Off. The line
synchronizer function operates in this case.
The line synchronizer function automatically
adjusts the phases of input video signals to
match the phases of the horizontal sync signals.
Normal Enables the frame synchronizer function. When
a signal that is different from the system format
is input, the screen turns black.
Auto Enables the frame synchronizer function. Even
when a signal that is different from the system
format is input, the screen does not turn black.
The video output in this case may be disrupted.
p If the output signal phase is set to [0H], Off cannot be
selected as the FS item setting.
p When inputting 3G-SDI Level B Mapping signals, set the
frame synchronizer setting to [Auto].