Button assignments, Setting the user buttons, System settings – Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher User Manual
Page 121
121
System settings
Button assignments
Setting the user buttons
The user can assign several functions which can be set using
the menu items into eight user buttons (U1 to U8).
The user buttons light in amber when the assigned function is
ON and are off when the assigned function is OFF.
Each time the user button is pressed, the function setting
alternates between ON and OFF.
The table below lists the functions which can be assigned to
the user buttons (U1 to U8).
Function name
Description of function
KEY1 PVW
Output the KEY1 image to the preview output.
KEY2 PVW
Output the KEY2 image to the preview output.
KEY3 PVW
Output the KEY3 image to the preview output.
DSK1 PVW
Output the DSK1 image to the preview output.
DSK2 PVW
Output the DSK2 image to the preview output.
GPII-EN
Enables or disables GPI-In.
GPIO-EN
Enables or disables GPI-Out.
SHIFT
Switches all the A/B bus and AUX bus
crosspoints between front and rear.
AUX TRANS
Enables or disables the AUX bus transitions.
AUX1 TRANS
Enables or disables the AUX1 bus transitions.
AUX2 TRANS
Enables or disables the AUX2 bus transitions.
DSK1 on AUX1 Adds DSK to the AUX1 output.
DSK2 on AUX2 Adds DSK to the AUX2 output.
Effect Dissolve Switches effect dissolve between ON and
OFF.
Dissolve
Nothing is assigned.
w
Default settings
Button
Function name
Button
Function name
U1
KEY1 PVW
U5
DSK2 PVW
U2
KEY2 PVW
U6
AUX Trans
U3
KEY3 PVW
U7
Effect Dissolve
U4
DSK1 PVW
U8
SHIFT
<Setting method>
1
Press the
CONF
SYS
button to light its indicator, and display
the Config menu.
2
Use [F1] to display the User Button1 sub menu and
User Button2 sub menu.
p
User Button1 to 4 sub menu
3
Use [F2] to select the function to be assigned to the
[U1] button using the User1 item.
4
Use [F3] to select the function to be assigned to the
[U2] button using the User2 item.
5
Use [F4] to select the function to be assigned to the
[U3] button using the User3 item.
6
Use [F5] to select the function to be assigned to the
[U4] button using the User4 item.
p
User Button5 to 8 sub menu
7
Use [F2] to select the function to be assigned to the
[U5] button using the User5 item.
8
Use [F3] to select the function to be assigned to the
[U6] button using the User6 item.
9
Use [F4] to select the function to be assigned to the
[U7] button using the User7 item.
Use [F5] to select the function to be assigned to the
[U8] button using the User8 item.