Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher - Manual (Page 138)

138
Remote camera link functions
F1 F2 F3 F4 F5
 
    
A Input source information
display The following information is displayed.
The CAM bus source material name/camera name/(camera model name)/camera status
The name set on the remote camera is displayed as the camera name.
Camera status
Power On Normal situation
Pan & Tilt Alarm When a problem is detected with the pan/tilt of the camera
Fan Alarm When a problem is detected with the fan of the camera
Other Alarm When a problem is detected with something other than the pan/tilt or fan of the camera
B Z-Dial Indicates the application for [Z].
Each time you press [Z], operation switches between P-T Speed and Zoom.
P-T Speed Indicates the status of the control speed of pan/tilt. “Fast” indicates fast operation and “Slow” indicates
slow operation.
Zoom Indicates the zoom position. “Tele” indicates the telephoto side and “Wide” indicates the wide side.
Focus Indicates the focus position. “Far” indicates the far side and “Near” indicates the near side.
“Auto” is displayed when auto focus is on.
Iris Indicates the iris status. “Open” indicates that the iris is open and “Close” indicates that the iris is closed.
“Auto” is displayed when the auto iris is on.
C [F1] Zoom moves to the telephoto end at a constant speed when the button is pressed. An explanation is
also displayed on the Menu screen.
D [F2] Zoom moves to the wide end at a constant speed when the button is pressed. An explanation is also
displayed on the Menu screen.
E [F3] Turn left and right to operate the zoom. Zoom to the wide end with a counterclockwise turn and to the
telephoto end with a clockwise turn.
An explanation is also displayed on the Menu screen.
F [F4] Turn left and right to operate the preset targets.
Preset targets can be switched between the following 3 modes.
Mode A Set the pan/tilt, zoom, focus, iris, gain, and white balance that are the targets of presetting.
Mode B Set the pan/tilt, zoom, focus, and iris that are the targets of presetting.
Mode C Set the pan/tilt, zoom, and focus that are the targets of presetting.
G [F5]
1 Minimum speed
20 Default value
30 Maximum speed
p The screen displays here show the models that support thumbnails (AW-UE150 series).
Other models will not display thumbnails, with icons displayed instead.