Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher - Manual (Page 78)

78
Basic operations
w Setting the event switching effect (Path)
Switching from one event to another (bus switching) can be
accomplished smoothly.
1 Press the SHOT
EVENT
button to light its indicator, and display
the Event Memory menu.
2 Use [F1] to display the Path sub menu.
3 Use [F2] and the Trans Path item to set how transitions
to the next event are performed.
The following transitions are available:
p Width of the borders
p Soft effect of the borders
p Positions of the images
p Trimming values
Linear The switching from one image to another is
interpolated linearly.
Spline The switching from one image to another is
interpolated over a smooth curve (a cubic
function curve).
Step The parameters are updated when the events
are passed through.
4 Use [F3] to select the effect when the colors are
switched using the Hue Path item.
The following hues are targeted.
p Colors of the color background
p Colors of the borders
p Colors of the edges
p Colors of the fill matte
Short The colors are changed toward less hue on
the vectorscope.
Long The colors are changed toward more hue on
the vectorscope.
CW The Hue is changed clockwise on the
vectorscope.
CCW The Hue is changed counterclockwise on the
vectorscope.
Step The color changes are updated when an
event is passed through.
Macro memory settings
Recording non-operation periods
1 Press the VMEM
MACRO
button to light its indicator, and display
the Macro menu.
2 Use [F1] to display the Insert Delay sub menu.
3 Use [F2] to set the time of the non-operation period in
the Time item.
4 Use [F3] to save the time set in Step 3 .
Assigning macro memories
You can assign registered macro memories to the AUX bus
crosspoint buttons.
1 Press the VMEM
MACRO
button to light its indicator, and display
the Macro menu.
2 Use [F1] to display the Macro Assign1/6 to 6/6 sub
menu.
3 Use [F2] to [F5] in each of the sub menus to set the
macro memories assigned to each crosspoint in the
XPT1 to 24 items.