Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher - Manual (Page 145)

145
External interfaces
Controlling with external panels
With this unit, you can perform the following operations from
external panels (*) connected via an IP network:
p p Select materials for each bus
p p Execute video transitions
p p Play back macro memories
p p Play back shot memories
*: This unit supports the LBP series from LAWO. Consult
LAWO for LBP series settings and operations.
Preparations
Use a LAN cable to connect the external panel to the LAN
connector on the back of the unit.
It is possible to connect a maximum of 20 external panels.
When connecting multiple external panels, connect via a hub.
External panel settings
Check the following settings on this unit, then make the
settings on the connected external panels:
p p System menu  Network1 sub menu
Take the address value set in the IP Address item of this
sub menu and set it as the IP address of the device that
will be the target of the external panel operations.
p p System menu  ExtPanel Info sub menu
Take the port number set in the Port No item of this sub
menu and set it as the port number of the device that will
be the target of the external panel operations.
Also set the subnet mask (Network2 sub menu) and the
default gateway (Network3 sub menu) according to the
network environment connected.
Settings on this unit when external panels
are connected
Receiving port number settings
1 Press the CONF
SYS
button to light its indicator, and display
the System menu.
2 Use [F1] to display the ExtPanel Info sub menu.
3 Use [F2] to set the receiving port number used by this
unit.
Possible setting range 62000 to 65535
Default value
62010
Shot memory playback target settings
Set the playback targets for when shot memories of this unit
are played back by operations on the external panels.
1 Press the CONF
SYS
button to light its indicator, and display
the System menu.
2 Use [F1] to display the ExtPanelIP SMEMRecall1/2 sub
menu.
3 Use [F2] to [F4] to set the playback targets for the shot
memory.
p ME, DSK, AUX, color background, and crosspoint area
can be individually turned ON/OFF.