Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher - Manual (Page 130)

130
Remote camera link functions
Remote camera operation direction settings
You can use the positioner and encoders of this unit to
control the pan, tilt, zoom, focus, and iris of remote cameras
connected to this unit.
The settings for the operation direction are made as follows:
1 Use [F1] to display the Camera Settings3 sub menu.
2 The pan control direction for the remote camera using
the positioner of this unit is set in the Pan Direction item.
Normal The operation direction of the positioner and
the direction of image movement are the
same.
Reverse The operation direction of the positioner and
the direction of image movement are the
opposite.
3 The tilt control direction for the remote camera using the
positioner of this unit is set in the Tilt Direction item.
Normal The operation direction of the positioner and
the direction of image movement are the
same.
Reverse The operation direction of the positioner and
the direction of image movement are the
opposite.
4 Use [F1] to display the Camera Settings4 sub menu.
5 The zoom control direction for the remote camera using
[F1]/[F2]/[F3]/[Z] operations of this unit is set in the
Zoom Direction item.
Normal Zoom moves to the telephoto end when [F1]
is pressed.
Zoom moves to the wide end when [F2] is
pressed.
Zoom moves to the telephoto end when [F3]
is pressed/[Z] is turned clockwise.
Zoom moves to the wide end when [F3] is
pressed/[Z] is turned counterclockwise.
Reverse Zoom moves to the wide end when [F1] is
pressed.
Zoom moves to the telephoto end when [F2]
is pressed.
Zoom moves to the wide end when [F3] is
pressed/[Z] is turned clockwise.
Zoom moves to the telephoto end when [F3]
is pressed/[Z] is turned counterclockwise.
6 The focus control direction for the remote camera using
[F4] operations of this unit is set in the Focus Direction
item.
Normal Focus moves to the far side with a clockwise
turn.
Focus moves to the near side with a
counterclockwise turn.
Reverse Focus moves to the near side with a
clockwise turn.
Focus moves to the far side with a
counterclockwise turn.
7 The iris control direction for the remote camera using
[F5] operations of this unit is set in the Iris Direction
item.
Normal The iris opens with a clockwise turn.
The iris closes with a counterclockwise turn.
Reverse The iris closes with a clockwise turn.
The iris opens with a counterclockwise turn.
Remote camera tally control settings
You can link the red tally control of remote cameras
connected to this unit to the red tally control of this unit.
1 Use [F1] to display the Camera Settings3 sub menu.
2 Set the link between the red tally control on this unit and
the red tally control on the remote camera in the Tally
(Group1) item.
Enable Linked.
Disable Not linked.