Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher - Manual (Page 31)

31
Preparations
Setting the system format
One system format (input/output signal) can be selected.
1 Press the CONF
SYS
button to light its indicator, and display
the System menu.
2 Use [F1] to display the Format sub menu.
3 Use [F3] to select 4K or 2K in the Switcher Mode item,
then press [F3] to confirm the selection.
p When you switch the Switcher Mode of this unit between
4K and 2K, Initial and a restart are executed.
Initial means that all of the current settings are cleared.
4 Use [F4] to select the color space in the Color Space
item, then press [F4] to confirm the selection.
Setting the date and time
The user can set the date and time to be used as the memory
card’s time stamp.
Be absolutely sure to set them when an memory card is to be
used.
Setting the date
1 Press the CONF
SYS
button to light its indicator, and display
the System menu.
2 Use [F1] to display the Date sub menu.
3 Use [F2] to set the year using the Year item.
4 Use [F3] to set the month using the Month item.
5 Use [F4] to set the day using the Date item.
6 Press the [F5] to enter the year/month/day.
7 Press [F1] (YES) to save. Press [F5] (NO) to disable.
Setting the time
1 On the System menu, use [F1] to display the Time sub
menu.
2 Use [F2] to set the hour using the Hour item.
3 Use [F3] to set the minutes using the Minute item.
4 Use [F4] to set the seconds using the Second item.
5 Press the [F5] to enter the hour/minutes/seconds.
6 Press [F1] (YES) to save. Press [F5] (NO) to disable.
The time counts up from when the power is turned on.
About the built-in battery for the date/time
When the time display is “2014/01/01 00:00:00”, the built-in
battery for the date/time is exhausted.
After recharging the built-in battery for the date/time, set the
date and the time.
To recharge the built-in battery for the date/time
Turn the power of the unit on and leave it for approximately
3 hours.
It can keep the clock settings for approximately 6 months.