Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher - Manual (Page 63)

63
Basic operations
Setting the Wash effect
The gradation effect for color backgrounds can be set.
Selecting the Wash effect and setting the colors
1 Press the BKGD
CBGD
button to light its indicator, and display
the Color Background menu.
2 Use [F1] to display the CBGD1 Wash sub menu (or
CBGD2 Wash sub menu).
3 Use [F2] to set the Wash (gradation) effect using the
Wash item.
On The gradation effect is added.
Off The gradation effect is not added.
4 Use [F3] to set the color of the Wash (gradation) effect
using the Color item.
Dual A dual-color gradation effect is added.
(This results in a gradation of two colors,
namely, the CBGD1 Main color and the
CBGD1 Sub color.)
Rainbow The rainbow color gradation effect is added.
5 When “Dual” has been selected, use [F1] to display the
CBGD1 Sub sub menu (or CBGD2 Sub sub menu), and
set the sub color.
6 Use [F2], [F3] and [F4] to adjust the colors (Hue, Sat
and Lum).
Adjusting the Wash waveforms
1 On the Color Background menu, use [F1] to display the
CBGD1 Wave sub menu (or CBGD2 Wave sub menu).
2 Use [F2] to select the gradation waveforms using the
Pattern item.
Sine Sine waves are selected.
Saw Sawtooth waves are selected.
3 Use [F3] to select the gradation cycle using the Cycle
item.
4 Use [F4] to select the gradation phase using the Phase
item.
5 Use [F5] to select the gradation angle using the Angle
item.
Setting the Wash movements
1 On the Color Background menu, use [F1] to display the
CBGD1 Move sub menu (or CBGD2 Move sub menu).
2 Use [F2] to set the gradation movement using the Move
item.
Off No movement is set.
Roll The gradations are scrolled.
Rotation The gradations are rotated.
3 Use [F3] to set the movement speed using the Speed
item.