Controlling in the camera preset memory screen, Remote camera link functions – Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher User Manual
Page 137
137
Remote camera link functions
Controlling in the camera preset memory screen
When remote cameras are connected to this unit, you can control them in the camera preset screen while displaying the
thumbnail image of the selected camera preset memory on the built-in LCD.
1
While the unit is connected to the remote camera and the [CAM CONT] button is blinking orange, press the
CAM
PMEM
button.
2
The display on the built-in LCD of the unit switches.
p
It is possible to save, play back, and delete preset memories using the number keys.
p
Zoom control is possible using [F1] to [F3].
p
It is possible to change the preset scope/preset speed using [F4]/[F5].
You can store up to a maximum of 100 preset memories in the remote cameras connected to this unit.
p
p
They are not stored in this unit.
100 preset memories are divided between 10 pages, so 10 preset memories can be saved in 1 page.
If there is a preset memory that corresponds to the number key, the LED of the number key lights.
The number key that corresponds to the preset memory that was recalled last on this unit turns orange and all others turn green.
You can select the operation for the preset memory each time you press the [STORE]/[RECALL]/[DEL] buttons.
p
p
While the [STORE] button is lit red, you can store preset memories by holding down the number keys.
p
p
While the [RECALL] button is lit orange, you can execute preset memories by pressing the number keys.
p
p
While the [DEL] button is lit red, you can delete preset memories by holding down the number keys.
STORE
DEL
MACRO
EDIT
SHOT
MEM
KEY1
F/S
KEY2
F/S
KEY3
F/S
DSK1
F/S
DSK2
F/S
MV1
MV2
PGM
PVW
DISP
CAM
XPT
DSBL
TAKE
ENTER
7
NEW
8
COPY
9
PASTE
4
INS
5
DEL
6
MOD
1
<
2
>
3
REV
0/10
<<
.
>>
C
UNDO
CAM
PMEM
EVENT
MEM
-/+
PAGE
RE
CALL
MENU
MEMORY / WIPE PATTERN / 10 KEY
AUX BUS DELEGATION
AUX /DISP SOURCE
AMBER : FILL / GREEN : SOURCE
STILL 1
STILL 2
TRIM IN
REC
CLIP 1
CLIP 2
TRIM OUT
<
F1
F2
F3
AUX1
AUX
AUX2
AUX3
AUX4
MACRO
BKGD
KEY
SHIFT
MIX
MIX
F4
F5
>
REV
<<
>>
TRIM OFF
PLAY
STOP
DISPLAY
p
p
Changing the preset scope/preset
speed
p
p
PMEM operation selection
p
p
Execute operations corresponding to PMEM
p
p
Switching of the camera that is the target of operation by the CAM bus
p
p
Zoom control