User button area, Transition area, Parts and their functions – Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher User Manual
Page 20: User buttons (user button) [u1 to u8, Macro] button, Key] button, Bkgd] button, Mix, wipe selection status leds, Mix] button
20
Parts and their functions
User button area
User buttons (USER BUTTON) [U1 to U8]
These are used to assign some functions of the menu
settings to the [U1] to [U8] buttons on the Config menu.
Refer to “Setting the user buttons”.
U1
U2
U3
U4
USER
U5
U6
U7
U8
Transition area
FTB
ON
KEY1
ON
KEY2
ON
KEY3
ON
DSK1
ON
DSK2
ON
WIPE DIRECTION
MACRO
N/R
BKGD
KEY
MIX
CUT
AUTO
MIX
MIX
WIPE
WIPE
WIPE
R
[MACRO] button
This executes the Macro memory set in XPT with Macro
Assign in the menus.
The [AUX] button, in which Macro memory is set with
Macro Assign in the menus, turns green when the
[MACRO] button is selected and turns amber.
The registered Macro memory is executed when the
illuminated button is selected.
[KEY] button
This executes the KEY1 transition when the [CUT] button
(
), [AUTO] button (
) or fader lever (
) has been
operated.
When the [KEY] button is pressed and it is selected, its
indicator lights in amber.
If the [BKGD] button (
) is now pressed, the indicator
goes off, and the de-selected status is established.
When the [BKGD] button (
) and [KEY] button are
pressed at the same time, both buttons are set to the
selected status.
[BKGD] button
This executes the background transition when the [CUT]
button (
), [AUTO] button (
) or fader lever (
) has been
operated.
When the [BKGD] button is pressed and it is selected, its
indicator lights in amber.
If the [KEY] button (
) is now pressed, the indicator goes
off, and the de-selected status is established.
When the [BKGD] button and [KEY] button (
) are
pressed at the same time, both buttons are set to the
selected status.
MIX, WIPE selection status LEDs
These light up to indicate whether MIX or WIPE has been
selected when background transitions or key transitions
are executed.
[MIX] button
This is used to switch the A and B bus images while
making them overlap.
During the transition, the A and B bus output total is kept
at 100%.
When the [MIX] button is pressed and it is selected, its
indicator lights in amber.
If the [WIPE] button (
) is now pressed, it goes off, and
the de-selected status is established.