Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher - Manual (Page 131)

131
Remote camera link functions
Selecting the cameras to be operated
By connecting remote cameras to this unit, you can control
remote cameras using the positioner and encoders of this
unit.
1 Assign the remote cameras connected to XPT. Refer to
“Selecting the terminals for remote camera connection”
for information on how to assign.
2 Press the [DISP/CAM] button to make it turn green.
KEY1
F/S
KEY2
F/S
KEY3
F/S
DSK1
F/S
DSK2
F/S
MV1
MV2
PGM
PVW
DISP
CAM
AUX BUS DELEGATION AUX /DISP SOURCE AMBER : FILL / GREEN : SOURCE
AUX1
AUX
AUX2 AUX3 AUX4
SHIFT
XPT2
3 Select the remote cameras assigned in Step 1 as the
CAM bus sources.
p The selected buses turn green.
The inputs that can be selected as the CAM bus
sources are the following inputs. XPTs other than these
cannot be selected.
· IN1 to IN2
· SDI IN1 to SDI IN8
· IN-A1 to IN-A4
· IN-B1 to IN-B4
p When remote camera control is enabled, the [CAM
CONT] button blinks orange.
Camera control is disabled if the menus displayed are
as follows when the [MENU] button is pressed:
· Background menu
· Key1 to Key3 menu
· DSK1 menu
· Chroma Key menu
· While the keyboard screen is being displayed
4 The pan and tilt on the remote camera connected to this
unit are controlled by moving the positioner up, down,
left, and right.
VMEM
BKGD
PATT
CAM
CONT
KEY
PATT
MENU
HOLD
PRJ
SD Card
ALARM
LINK Z
ZOOM
X/Y
PAN/TLT
Blinks
5 Turning [Z] left and right adjusts the control speed for
pan/tilt and operates the zoom.
You can switch the control speed and zoom operation
by pressing [Z].