Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher - Manual (Page 24)

24
Parts and their functions
Positioner area
Z
ZOOM
X/Y
PAN/TLT


 Positioner (POSITIONER) [X/Y] [PAN/TILT]
These are used when performing the settings below.
p Key PinP, DSK PinP position settings
p Wipe start position setting
Target patterns:
WIPE1: 5
WIPE2: 4, 5, 6, 7
SQ1: 5
SQ2:
4, 5, 6, 7
 Refer to “Wipe”.
p Flying key position setting
p Chroma key marker position setting
p When entering characters
p When making settings using the keyboard screen
p Pan and tilt control for a remote camera
In each case, the settings take effect only when the
following menu items have been selected.
During the time it takes for the unit to start up after its
power is turned on, the unit detects the positions of the
positioners and sets them to their center positions.
Do not touch the positioners until the unit has started up.
Note
 Rotary encoder [Z] [ZOOM]
This is used to set the PinP size, flying key size or to select
the chroma key area.
Also used to control the zoom on a remote camera.
In each case, the settings take effect only when the
following menu items have been selected.
It is also used for settings using the keyboard screen.
Positioner Rotary encoder
Valid menu
X/Y Z Switch
Key PinP,
DSK PinP
Position adjustments Size adjustments
(size increased by rotating the
encoder clockwise and reduced
by rotating it counterclockwise) Hold switch down to restore
initial values (X/Y, Z). PinP Position
WIPE (BKGD) Start position
adjustments — Hold switch down to restore
initial values (X/Y). Background/Position
WIPE (KEY) Start position
adjustments — Hold switch down to restore
initial values (X/Y). Key/Position
Chroma key Selection position
adjustments Selected area size adjustments
(size increased by rotating the
encoder clockwise and reduced
by rotating it counterclockwise) Execute sampling
Hold switch down to restore
size to initial values. Chroma Key
Flying key Position adjustments Size adjustments
(size increased by rotating the
encoder clockwise and reduced
by rotating it counterclockwise) Hold switch down to restore
initial values (X/Y, Z). Key1: Flying Key
When the [CAM CONT] button (  ) turns or blinks amber, these can be used for the PAN/TILT or ZOOM control of the camera
that is registered in Camera Information.