Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher - Manual (Page 162)

162
Menu
Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4
Use [F1] to select. Use [F2] to select. Use [F3] to select. Use [F4] to select. Use [F5] to select.
Camera Camera
Information Parameter Input Selection Name Model Status
Setting range *1 *2 Model name of
the camera
“–” is displayed
if no camera is
connected. *3
Default value IN1 No IP Address
Camera
Control Parameter Power All Power On All Standby Z-Dial Usage
Setting range Standby, On Execute Execute P-T Sp. & Zoom,
P-T Speed Only
Default value Undetermined
(depends on the
settings on the
camera) P-T Sp. & Zoom
Control Speed Parameter Pan & Tilt Zoom Focus Iris
Setting range 1 to 32 1 to 32 1 to 32 1 to 32
Default value 16 16 16 16
OSD Menu &
Color Bars Parameter OSD Menu Menu
Operation Color Bars
Setting range On, Off (Turn or Push) On, Off
Default value Undetermined
(depends on the
settings on the
camera) Undetermined
(depends on the
settings on the
camera)
Lens Control Parameter Auto Focus Auto Iris
Setting range On, Off On, Off
Default value Undetermined
(depends on the
settings on the
camera) Undetermined
(depends on the
settings on the
camera)
AWB Parameter AWB Last AWB
Result AWB Mode
Setting range Execute , Successful,
Failed
ATW, AWB A,
AWB B,
3200K, 5600K,
VAR
Default value Undetermined
(depends on the
settings on the
camera)
*1: IN1, IN2, SDI IN3, SDI IN4, SDI IN5, SDI IN6, SDI IN7, SDI IN8, HDMI IN1, HDMI IN2,
SlotA HDMI IN board is inserted: IN-A1, IN-A2, IN-A3,
SlotA SDI IN board is inserted: IN-A1, IN-A2, IN-A3, IN-A4,
SlotB HDMI IN board is inserted: IN-B1, IN-B2, IN-B3
SlotB SDI IN board is inserted: IN-B1, IN-B2, IN-B3, IN-B4
*2: Name registered on the camera.
When a camera is not connected, “–” is displayed. When the camera name is just a single space, “(Standby Mode)”
is displayed.
*3: No IP Address, Now Checking..., Connected, Unauthorized, Not Connected, Please Wait...,
Pan & Tilt Alarm, Fan Alarm, Other Alarm
Setting menu table