Teledyne LeCroy Merlins Wand - Users Manual User Manual
Catc merlin’s wand, 00 bluetooth, Test generator user’s manual
Advertising
Table of contents
Document Outline
- Document Disclaimer
- Trademarks and Servicemarks
- Copyright
- FCC Conformance Statement
- EU Conformance Statement
- Table of Contents
- 1. Overview
- 2. Getting Started
- 3. Profile Wizard
- 3.1 Starting Profile Wizard
- 3.2 Connecting to Devices
- Connect to Device: Dial-Up Gateway
- Connect to Device: Fax Gateway
- Connect to Device: File Transfer
- Connect to Device: HCRP Server
- Connect to Device: Headset
- Connect to Device: Headset Audio Gateway
- Connect to Device: LAN
- Connect to Device: Object Push
- Connect to Device: PAN–GN
- Connect to Device: PAN–NAP
- Connect to Device: Serial Port
- 3.3 Emulating Devices
- 3.4 Restarting the Wizard
- 3.5 Installing the Virtual COM Port Driver
- 3.6 Install a Modem Driver on the Virtual COM Port
- 3.7 Installation of Network Driver
- 4. Command Generator
- 5. Script Manager
- 6. Device Search and Device List Pop-Up Menu
- 7. Data Transfer Manager and Data Pipes
- 8. Using Merlin to Record Merlin’s Wand Traffic
- 8.1 Set Up a Remote Machine
- 8.2 Set Up Connection Options
- 8.3 Start Merlin
- 8.4 Connect to Merlin with Merlin’s Wand
- 8.5 Set Merlin Recording Options
- 8.6 Set Merlin Display Options
- 8.7 Set Merlin Encryption Options
- 8.8 Start a Merlin Recording Session
- 8.9 Stop a Merlin Recording Session
- 8.10 Disconnect from Merlin Bluetooth Protocol Analyzer
- 8.11 Troubleshooting
- 9. Contact and Warranty Information
- Appendix A: Command Generator Command Descriptions
- A.1 HCI Command Descriptions
- HCI Link Control Commands
- Accept_Connection_Request
- Add_SCO_Connection
- Authentication_Requested
- Change_Connection_Link_Key
- Change_Connection_Packet_Type
- Create_Connection
- Disconnect
- Exit_Periodic_Inquiry_Mode
- Inquiry
- Inquiry_Cancel
- Periodic_Inquiry_Mode
- PIN_Code_Request_Negative_Reply
- PIN_Code_Request_Reply
- Read_Clock_Offset
- Read_Remote_Supported_Features
- Read_Remote_Version_Information
- Reject_Connection_Request
- Remote_Name_Request
- Set_Connection_Encryption
- HCI Link Policy Commands
- HCI Host Controller & Baseband Commands
- Change_Local_Name
- Delete_Stored_Link_Key
- Host_Buffer_Size
- Read_Authentication_Enable
- Read_Class_of_Device
- Read_Connection_Accept_Timeout
- Read_Current_IAC_LAP
- Read_Encryption_Mode
- Read_Link_Supervision_Timeout
- Read_Local_Name
- Read_Number_Of_Supported_IAC
- Read_Page_Scan_Mode
- Read_Page_Scan_Period_Mode
- Read_Page_Timeout
- Read_PIN_Type
- Read_Scan_Enable
- Read_SCO_Flow_Control_Enable
- Read_Stored_Link_Key
- Read_Voice_Setting
- Reset
- Set_Event_Filter
- Set_Event_Mask
- Write_Authentication_Enable
- Write_Class_of_Device
- Write_Connection_Accept_Timeout
- Write_Current_IAC_LAP
- Write_Encryption_Mode
- Write_Link_Supervision_Timeout
- Write_Page_Timeout
- Write_PIN_Type
- Write_Scan_Enable
- Write_Stored_Link_Key
- Write_Voice_Setting
- HCI Informational Commands
- HCI Testing Commands
- CATC-Specific HCI Commands
- A.2 Other HCI Events
- A.3 L2CAP Command Descriptions
- A.4 Other L2CAP Events
- A.5 SDP Command Descriptions
- A.6 RFCOMM Command Descriptions
- A.7 Other RFCOMM Events
- A.8 TCS Command Descriptions
- A.9 OBEX Command Descriptions
- A.10 BNEP Command Descriptions
- Appendix B: Command Generator Examples
- B.1 Device Discovery and Remote Name Request
- B.2 Establish Baseband Connection
- B.3 Baseband Disconnection
- B.4 Create Audio Connection
- B.5 L2CAP Connection
- B.6 L2CAP Channel Disconnect
- B.7 SDP Profile Service Search
- B.8 SDP Reset Database and Add Profile Service Record
- B.9 RFCOMM Client Channel Establishment
- B.10 RFCOMM Client Channel Disconnection
- B.11 RFCOMM Register Server Channel
- B.12 Establish TCS Connection
- B.13 OBEX Server Init
- B.14 OBEX Client Connection and Client Get & Put
- Appendix C: Merlin’s Wand Scripting Commands
- C.1 Bluetooth Addresses
- C.2 Basic Commands
- C.3 Pipe Commands
- C.4 HCI Commands
- HCIAcceptConnectionRequest()
- HCIAddSCOConnection()
- HCIAuthenticationRequested()
- HCICatcBerTest()
- HCICatcChangeHeadsetGain()
- HCICatcReadHeadsetGain()
- CATC_Read_PIN_Response_Enable()
- HCICatcReadRevisionInformation()
- HCICatcSelfTest()
- HCIChangeConnectionLinkKey()
- HCIChangeConnectionPacketType()
- HCIChangeLocalName()
- HCIDeleteStoredLinkKey()
- HCIEnableDeviceUnderTestMode()
- HCIExitParkMode()
- HCIExitSniffMode()
- HCIHoldMode()
- HCIMasterLinkKey()
- HCIParkMode()
- HCIPINCodeRequestNegativeReply()
- HCIPINCodeRequestReply()
- HCIQoSSetup()
- HCIReadAuthenticationEnable()
- HCIReadBDADDR()
- HCIReadBufferSize()
- HCIReadClockOffset()
- HCIReadConnectionAcceptTimeout()
- HCIReadCountryCode()
- HCIReadCurrentIACLAP()
- HCIReadEncryptionMode()
- HCIReadLinkPolicySettings()
- HCIReadLinkSupervisionTimeout()
- HCIReadLocalName()
- HCIReadLocalSupportedFeatures()
- HCIReadLocalVersionInformation()
- HCIReadLoopbackMode()
- HCIReadNumberOfSupportedIAC()
- HCIReadPageScanMode()
- HCIReadPageScanPeriodMode()
- HCIReadPageTimeout()
- HCIReadPINType()
- HCIReadRemoteSupportedFeatures()
- HCIReadRemoteVersionInformation()
- HCIReadScanEnable()
- HCIReadSCOFlowControlEnable()
- HCIReadStoredLinkKey()
- HCIReadVoiceSetting()
- HCIRejectConnectionRequest()
- HCIRemoveSCOConnection()
- HCIReset()
- HCIRoleDiscovery()
- HCISetConnectionEncryption()
- HCISetEventFilter()
- HCISniffMode()
- HCISwitchRole()
- HCIWriteAuthenticationEnable()
- HCIWriteConnectionAcceptTimeout()
- HCIWriteCurrentIACLAP()
- HCIWriteEncryptionMode()
- HCIWriteLinkPolicySettings()
- HCIWriteLinkSupervisionTimeout()
- HCIWriteLoopbackMode()
- HCIWritePageTimeout()
- HCIWritePINType()
- HCIWriteScanEnable()
- HCIWriteStoredLinkKey()
- HCIWriteVoiceSettings()
- C.5 OBEX Commands
- C.6 RFCOMM Commands
- RFCloseClientChannel()
- RFOpenClientChannel()
- RFRegisterServerChannel()
- RFSendData()
- RFSendDataFromPipe()
- RFReceiveData()
- RFWaitForConnection()
- RFAcceptChannel()
- RFAcceptPortSettings()
- RFCreditFlowEnabled()
- RFRequestPortSettings()
- RFRequestPortStatus()
- RFSetLineStatus()
- RFSetModemStatus()
- RFSendTest()
- RFAdvanceCredit()
- C.7 TCS Commands
- C.8 L2CAP Commands
- C.9 SDP Commands
- C.10 Merlin Commands
- Appendix D: CATC Scripting Language