Sniff_mode, Switch_role, Write_link_policy_settings – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 112: Sniff_mode switch_role write_link_policy_settings
96
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
A
User’s Manual
Command Generator Command Descriptions
Sniff_Mode
Places the specified ACL link into Sniff mode.
Switch_Role
Switches the current role (master/slave) of the calling device with the role
of the device specified.
Write_Link_Policy_Settings
Writes link policy settings for the specified ACL link.
Return Events
Role_Discovery_Complete
Role_Discovery_Error
Command Parameters
Examples
Comments
HCI_Handle
0x0001
Max_Interval
0xFFFF
0x0001 - 0xFFFF
Min_Interval
0x01
0x0001 - 0xFFFF
Attempt
0x3FF6
0x0001 - 0x7FFF
Timeout
0x7FFF
0x0000 - 0x7FFF
Return Events
Mode_Change
Sniff_Mode_Error
Command Parameters
Examples
Comments
BD_ADDR
0x010203040506
Return Events
Role_Change_Complete
Role_Change_Error
Command Parameters
Examples
Comments
HCI_Handle
0x0001
Link_Policy_Settings
0xF
0x0000: Disable all LM
modes
0x0001: Enable
master/slave switch
0x0002: Enable Hold Mode
0x0004: Enable Sniff Mode
0x0008: Enable Park Mode
0xF: Enable all (Default)