Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 56)

40
CATC M ERLIN ’ S W AND 2.00 C HAPTER 3
User’s Manual Profile Wizard
file, which you should be able to find either on the
installation CD-ROM or in the directory in which Merlin’s
Wand is installed.
When you have located the file, click Open.
Step 9
Click OK to use the file you have selected.
Step 10
Select “CATC Bluetooth Serial Port” and click OK.
Step 11 Click Next to install the driver.
Step 12
Click Finish to complete the installation.
Ascertain the COM Port Number
Step 1 Select Start > Settings > Control Panel from the desktop
taskbar, then double-click on System in the Control Panel
window.
The System Properties dialog will open.
Step 2
Select the Hardware tab and click the Device Manager
button.
The Device Manager will open.
Step 3 Expand the Ports (COM & LPT) level and locate the CATC
Bluetooth Serial Port.
Step 4
Note the port number for the CATC Bluetooth Serial Port.
You will need to know the number in order to install things
such as the fax modem driver that is necessary to connect to
a fax device.
3.6 Install a Modem Driver on the Virtual COM Port
In order to perform dial-up networking or use a fax application to send fax
data through Merlin’s Wand, you need to install a modem driver on the
virtual COM port.
On Windows 2000:
Step 1
Complete steps 1-3 in Section , “Connect to Device: Dial-Up
Gateway” on page 19 or in Section on page 21.
Merlin’s Wand must be connected to the Dial-Up or Fax Gateway device
before installing the modem driver.
Step 2 Select Start > Settings > Control Panel from the desktop
taskbar, then double-click on Add/Remove Hardware in