Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 52)

36
CATC M ERLIN ’ S W AND 2.00 C HAPTER 3
User’s Manual Profile Wizard
Step 2
In the Emulate Device dialog, select LAN.
The LAN screen will open, indicating that Merlin’s Wand has been
configured to emulate a device that supports the LAN profile and is
awaiting connection from a device.
Emulate Device: Object Push
Merlin’s Wand can emulate the file transfer capabilities of wireless devices
that support the Object Push profile through the Object Push option. Object
Push emulation allows other devices to transfer files to Merlin’s Wand.
Step 1 Complete Steps 1-4 in Section 3.3, “Emulating Devices” on
page 30.
The Emulation Status screen will open, indicating that Merlin’s Wand
has been configured to emulate a Bluetooth device that supports the
Object Push profile and is awaiting connection from a device. It is now
ready to receive files.
Step 2
If desired, the folder in which transferred files are stored can
be changed. To change it, click the Change button and select
a new directory in the Browse for Folder dialog.
Step 3 Initiate file transfer from the Bluetooth device.
The Emulation Status screen will show the file transfer progress:
When the transfer is complete, the Emulation Status screen will show
that Merlin’s Wand is waiting for a connection after having successfully
received the file.
Emulate Device: PAN - GN
Profile Wizard allows you to emulate devices that use the Personal Area
Network (PAN)- General Networking (GN) profile.
Note To connect to a device that uses the PAN profile, you must install the virtual
network driver that is included with the Merlin’s Wand installation. For instructions, see
Section 3.7, “Installation of Network Driver,” on page 41.
Step 1
Complete Steps 1-4 in Section 3.3, “Emulating Devices” on
page 30.
Step 2
In the Select Profile screen, select PAN-GN, and click Next.
The Emulation Status screen will open, indicating that Merlin’s Wand
has been configured to emulate a Bluetooth device that supports the
PAN-GN profile and is awaiting connection from a device. It is now
ready to receive files.