B.2 establish baseband connection, Procedure, Establish baseband connection – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 155: Click execute
Advertising
139
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
B
User’s Manual
Command Generator Examples
B.2 Establish Baseband Connection
Procedure
In this scenario, Merlin’s Wand creates a Baseband (ACL) Connection.
This procedure assumes that Device Discovery has already been performed.
See “Device Discovery and Remote Name Request” on page 138.
Step 1
From the HCI menu select Create_Connection.
Step 2
Select the target device from the BD_ADDR drop-down
menu or enter a new BD_ADDR.
Step 3
Click Execute.
The Event Log should display a Connection_Complete or
Connection_Failed response.
Advertising