Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 105)

89
CATC M ERLIN ’ S W AND 2.00 C HAPTER A
User’s Manual Command Generator Command Descriptions
Create_Connection
Create_Connection will cause the link manager to create an ACL
connection to the Bluetooth wireless device with the BD_ADDR specified
by the command parameters.
Disconnect
Disconnect is used to terminate an existing connection.
Exit_Periodic_Inquiry_Mode
Exit_Periodic_Inquiry_Mode is used to end the Periodic Inquiry mode
when Merlin’s Wand is in Periodic Inquiry mode.
Return Events
Change_Connection_Packet_Type_Error
Change_Connection_Packet_Type_Complete
Command Parameters Examples Comments
BD_ADDR
Allow_Role_Switch
010203040506 Enter in HEX as shown.
Return Events
Create_Connection_Complete
Create_Connection_Error
Command Parameters Examples Comments
HCI_Handle 0x0001
Return Events
Disconnection_Complete
Disconnection_Failed
Command Parameters Examples Comments
N/A
Return Events
Exit_Periodic_Inquiry_Mode_Complete
Exit_Periodic_Inquiry_Mode_Error