Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 3)

iii
CATC M ERLIN ’ S W AND 2.00
User’s Manual
Merlin’s Wand Conformance Statements
FCC Conformance Statement
This equipment has been tested and found to comply with the limits for both
a Class A and Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial or residential
environment. This equipment generates, uses, and can radiate radio
frequency energy, and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. The end user of this product should be aware that any
changes or modifications made to this equipment without the approval of
CATC could result in the product not meeting the Class A or Class B limits,
in which case the FCC could void the user's authority to operate the
equipment.
Important Notice
This equipment contains Transmitter Module FCC ID PNI8001001. To
comply with FCC RF exposure requirements (sections 1.1307 and 1.310 of
the Rules) only the antenna supplied by CATC must be used for this device.
The antenna must be located at least 20 centimeters away from all persons.
EU Conformance Statement
This equipment complies with the R&TT Directive 1999/5/EC. It has been
tested and found to comply with EN55022:1998 Class B
(EN61000-3-2:1998, EN61000-3-3:1995), EN55024:1998
(EN61000-4-2:1995, EN61000-4-3:1995, EN61000-4-4:1995,
EN61000-4-5:1995, EN61000-4-6:1995, EN61000-4-11:1994), and
EN60950:1999. The transmitter module was tested and found to comply
with ETS 300 328 (1997).