Disconnect_tcs_call, Send_info_message, A.9 obex command descriptions – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 146: Clientabort, Disconnect_tcs_call send_info_message, Obex command descriptions
130
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
A
User’s Manual
Command Generator Command Descriptions
Disconnect_TCS_Call
This command is called to close an existing TCS connection according to
the Intercom profile specification of the TCS state machine, close the
L2CAP connection, and close the SCO connection.
Send_Info_Message
This command can be called after a TCS channel is opened. It sends an
INFORMATION TCS message with a called party number.
A.9 OBEX Command Descriptions
ClientAbort
This command will abort a ClientGet or ClientPut operation.
Return Events
Start_TCS_Call_Complete
Start_TCS_Call_Error
Command Parameters
Examples
Comments
N/A
Return Events
Disconnect_TCS_Call_Complete
Disconnect_TCS_Call_Error
Command Parameters
Examples
Comments
Phone_Number
408 727 6600
Phone number may contain
up to 10 digits.
Return Events
Send_Info_Complete
Send_Info_Error
Command Parameters
Examples
Comments
N/A
Return Events