Hcireadlinkpolicysettings() – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 202
186
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
C
User’s Manual
Merlin’s Wand Scripting Commands
{
Trace("Encryption mode is: 0x", result[1], "\n");
}
HCIReadLinkPolicySettings()
HCIReadLinkPolicySettings(Address)
Return value
Returns the following list of values: status and link policy settings.
Status (element 0) is one of the following:
•
“Success”
•
“Failure”
•
“Failed: Device not found”
•
“Not connected”
Link policy settings (element 1) is the two-byte value of the link policy set-
tings.
Comments
Reads the value of the Link_Policy_Settings parameter for the device.
Example
Device = '010203040506';
result = HCIReadLinkPolicySettings(Device);
Trace("HCIReadLinkPolicySettings returned: ", result[0],
"\n");
if (result[0] == "Success")
{
Trace("Link Policy Settings : ", result[1] ,"\n");
}
Parameter
Meaning
Default Value
Comments
Address
Bluetooth
address of
device in
question