Tcsdisconnectcall(), Tcssendinfomessage(), Tcsdisconnectcall() tcssendinfomessage() – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 251
235
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
C
User’s Manual
Merlin’s Wand Scripting Commands
Example
result = TCSStartCall();
Trace("TCSStartCall result : ", result, "\n");
if( result != "Success")
return result;
TCSDisconnectCall()
TCSDisconnectCall()
Return value
•
“Success”
•
“Failure”
Comments
This command is called to close an existing TCS connection according to
the Intercom profile specification of the TCS state machine, close the
L2CAP connection, and close the SCO connection.
Example
result = TCSDisconnectCall();
Trace("TCSDisconnectCall result : ", result, "\n");
if( result != "Success")
return result;
TCSSendInfoMessage()
TCSSendInfoMessage(Phone_Number)
Return value
•
“Success”
•
“Failure”
•
“Invalid Parameter”
Parameter
Meaning
Default Value
Comments
N/A
Parameter
Meaning
Default Value
Comments
Phone_Number
Up to 10-digit
Phone Num-
ber