Hcichangeconnectionlinkkey(), C.0.1 catc_write_pin_response_enable – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 186
170
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
C
User’s Manual
Merlin’s Wand Scripting Commands
C.0.1 CATC_Write_PIN_Response_Enable
Write the global flag for allowing PINs to be sent to requesting devices during
authentication.
HCIChangeConnectionLinkKey()
HCIChangeConnectionLinkKey(Address)
Return value
•
“Success”
•
“Failure”
•
“Not found”
•
“Not connected”
Comments
This command is used to force both devices associated with a connection
to generate a new link key.
Example
result = HCIChangeConnectionLinkKey('00803713BDF0');
Trace("Change Connection Link Key: ", result, "\n");
Command Parameters
Examples
Comments
PIN_Response_Enable
0 = disable
1 = enable
Return Events
Command Complete: Will return after the operation has completed.
Parameter
Meaning
Default Value
Comments
Address
Bluetooth
address of the
remote