B.13 obex server init, Procedure, Obex server init – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 168: Click the obex tab to display the obex menu, Select serverinit from the menu, Click execute
Advertising
152
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
B
User’s Manual
Command Generator Examples
B.13 OBEX Server Init
Procedure
In this scenario, Merlin’s Wand initializes itself as an OBEX server. This
scenario assumes that an ACL connection exists. See “Establish Baseband
Connection” on page 139.
Note
A connection is not necessary to call an OBEX ServerInit function.
Step 1
Click the OBEX tab to display the OBEX menu.
Step 2
Select ServerInit from the menu.
Step 3
Click Execute.
On completion of these steps, the application is ready to accept an
incoming OBEX connection.
Advertising