B.11 rfcomm register server channel, Procedure, Rfcomm register server channel – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 165: Click execute
Advertising
149
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
B
User’s Manual
Command Generator Examples
B.11 RFCOMM Register Server Channel
Procedure
In this scenario, Merlin’s Wand registers a Server Channel.
This procedure assumes that an ACL connection has been established. See
“Establish Baseband Connection” on page 139.
Note
A connection is not necessary to call a RegisterServerChannel command.
Step 1
From the RFCOMM menu select RegisterServerChannel.
Step 2
Click Execute.
The Event Log should indicate successful completion of the command
with the response “RegisterServerChannel_Complete.” On completion
of these steps, the application is ready to accept incoming RFCOMM
connections.
Advertising