Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 49)

33
CATC M ERLIN ’ S W AND 2.00 C HAPTER 3
User’s Manual Profile Wizard
(c) (Optional) Enable or disable event logging:
You can configure Merlin’s Wand to write incoming or outgoing data
to the Event Log by checking or unchecking the “Log Incoming
Data” and “Log Outgoing Data” options.
To connect to virtual COM port:
Note To connect to a virtual COM port, you will need to install the virtual COM port
driver that is included with the Merlin’s Wand installation. For instructions, see
“Installing the Virtual COM Port Driver” on page 39.
(a) Select “Connect to virtual COM port” and choose the fax classes that
Merlin’s Wand will support during emulation.
(b) Press Next.
At this point, initialize a connection to Merlin’s Wand from a
Bluetooth device that uses the Fax Gateway profile. When the
connection has been established, you can use an external application
to communicate with the device via Merlin’s Wand.
Emulate Device: File Transfer
Follow these steps to configure Merlin’s Wand to emulate a Bluetooth
device that supports the File Transfer profile.
Step 1
Complete Steps 1-4 in Section 3.3, “Emulating Devices” on
page 30.
The File Transfer Emulation screen will open.
Step 2
(Optional) Use the Change... button to change the root
folder that the remote device will access.
Step 3
Direct the remote device to connect to Merlin’s Wand.
An OBEX connection will be established between the device and
Merlin’s Wand.
Step 4
At this point, you may transfer files to the root folder from
the remote device.
Emulate Device: HCRP Server
This section explains how to use Profile Wizard to set up Merlin’s Wand to
emulate an HCRP server.
Step 1 Complete Steps 1-4 in Section 3.3, “Emulating Devices” on
page 30.
The Printer Emulation screen will open.