Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 100)

84
CATC M ERLIN ’ S W AND 2.00 C HAPTER 8
User’s Manual Using Merlin to Record Merlin’s Wand Traffic
“Server Busy” message appears when attempting to launch Merlin on a remote
Windows NT or Windows 2000 system.
• This message may appear the first time Merlin is launched on the remote
machine. It can be safely ignored. Merlin will start normally on the
remote machine. Clicking the “Switch To” button in the message box
will cause the message to disappear and the Start menu to appear. Return
to Merlin’s Wand and proceed normally.
“Server Execution Failed” When Attempting to Launch Merlin
“Server execution failed” message appears when attempting to launch Merlin on
a remote Windows 98 or Windows Me system.
• Make sure Merlin is running on the remote machine before clicking the
Connect/Disconnect Merlin button in Merlin’s Wand.
“The Object Exporter Specified Was Not Found” When Attempting to
Launch Merlin
“The object exporter specified was not found” message appears when attempting
to launch Merlin from a Windows 2000 system.
• If Merlin is already running on the remote machine, try to close it. If a
message appears indicating that an automation client is connected to the
application, close Merlin on the remote machine, close Merlin’s Wand on
the local machine, and try again. If the problem persists, restart the
remote machine.
• Make sure the local computer (the Windows 2000 system running
Merlin’s Wand) can reach the remote machine by using its full computer
name, such as <computername.domain>. Open a command prompt and
use the PING command to determine this. If the local computer cannot
communicate with the remote machine, consult a system administrator
for assistance.
• If the remote machine is running TCP/IP, make sure it has an assigned IP
address. Consult a system administrator for assistance in determining
this and, if necessary, assigning an IP address.