Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 246)

230
CATC M ERLIN ’ S W AND 2.00 C HAPTER C
User’s Manual Merlin’s Wand Scripting Commands
Trace("Xoff: ", settingsList[4], "\n");
}
}
RFSetLineStatus()
RFSetLineStatus(Address, DLCI, LineStatus)
Return value
• “Success”
• “Failure”
• “Not Connected”
• “Timed Out”
Comments
Sets the line status on a particular RFCOMM connection.
Example
result = RFOpenClientChannel(Device, 1);
DLCI = result[1];
if(result[0] == "Success")
{
status = RFSetLineStatus("CONNECTED_DEVICE", DLCI,
["RF_LINE_ERROR", "RF_FRAMING"]);
Trace("RFSetLineStatus returned: ", status, "\n\n");
}
Parameter Meaning Default Value Comments
Address Bluetooth
address of
device
Can use “CONNECTED_DEVICE” to set line
status on a master RFCOMM connection. Note
that this will work only if exactly one device is
connected via RFCOMM.
DLCI Data link con-
nection identi-
fier
The DLCI is returned by RFOpenClientChan-
nel()
LineStatus List of strings
representing
the Line Sta-
tus
Can be “RF_LINE_ERROR”,
“RF_OVERRUN”, “RF_PARITY”,
“RF_FRAMING”