B.4 create audio connection, Procedure, Create audio connection – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 157: Click execute
141
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
B
User’s Manual
Command Generator Examples
B.4 Create Audio Connection
Procedure
In this scenario, Merlin’s Wand creates an SCO connection.
This procedure assumes that you have established an ACL connection
between Merlin’s Wand and the target device. See “Establish Baseband
Connection” on page 139.
Step 1
From the HCI menu, select Add_SCO_Connection from the menu.
Step 2
Select the HCI_Handle for the previously established Baseband
connection (for example, 0x0001) from the HCI_Handle parameter
drop-down menu.
Step 3
Select a packet type from the Packet Type parameter drop-down
menu.
Step 4
Click Execute.
The Event Log should indicate that the command was executed and that
the target device responded with “Add_SCO_Connection_Complete” or
“Add_SCO_Connection_Error.”